Puzzle Guide: T-Tauri Terrace

From Star Stuff Wiki
Jump to navigation Jump to search

Note: This puzzle guide is adapted with permission from Sparky's Full Puzzle Solutions Guide on Steam

3.1: Gone Rogue

[edit | edit source]

3.1.1: Crate Bandit

[edit | edit source]

Code:

1. wait for: A button
2. pick up at: D position
3. drop at: C position

Solution:

Pick up the crate and step on A button. Then place the crate on the air bump, step on A button to launch the crate, and place the crate in the crate pad.

3.1.2: Corridor

[edit | edit source]

Code:

1. wait for: C switch
2. go to: B position

Solution:

Place the crate directly in front of the Walker Bot, blocking its progress, then flip C Switch. Pick up the crate, go to the alcove in the center so the Bot can pass, then place the box in the crate pad.

3.1.3: Cycle Break

[edit | edit source]

Code:

1. wait for: A crate pad
2. pick up at: A crate pad
3. drop at: B position
4. go to: C position
5. jump to: step 1. 

Solution:

Place the crate in the crate pad, then immediately pick it up. Wait for the Grabber Bot to finish trying to pick up, then place the crate back in the crate pad and head towards the goal.

3.1.4: The Bulwark

[edit | edit source]

Code:

1. wait for: A button
2. go to: D position
3. wait for: A button
4. go to: C position 

Solution:

Pick up the aerogel, and set it aside. Step on A button to let the Walker Bot go to D position. Place the aerogel in the crate pad. Step on A button, then go to the elevator.

3.1.5: Bridge Command

[edit | edit source]

Code:

1. wait for: C crate pad
2. pick up at: C crate pad 

Solution:

Flip the switch to light the bridge. Place one crate near the crate pad, and the other on the third tile of the bridge behind you as you cross. This will cause the Grabber Bot to be stuck over the button after placing the first box in the crate pad. Go down, flip the switch, and place the crate on the lower Button. Flip the switch again and head to the goal.

3.1.6: Crate Crook

[edit | edit source]

Code:

1. wait for: D crate pad
2. pick up at: A button
3. jump to: step 1. 

Solution:

Place the crate on the right-side Button. Use the Air Bump to launch the aerogel onto A button. Go down and swap the placement of the aerogel and the crate, so the crate is on A button and the aerogel is lighting the right-side bridge. Launch the second crate onto A button so there are two crates on top of each other. Pick up the aerogel, bring it to the crate pad, and ride the elevator up to the goal.

3.1.7: Shipment

[edit | edit source]

Code:

1. wait for: A crate pad
2. pick up at: D position
3. drop at: C position 

Solution:

Place the aerogel in A crate pad, standing on its left side so your body blocks the laser. After the Grabber Bot crosses, pick up the aerogel and bring it to B crate pad. Place the aerogel in the crate pad just before the Grabber Bot goes to cross the bridge towards D position, and pick it up again after the Bot passes and before the laser melts it. Place it down again just before the Grabber Bot goes to cross the bridge again and let the laser melt the aerogel. Pick up the crate from C position, place it in B crate pad, and head towards the goal.

3.2: Heavy Lifting

[edit | edit source]

3.2.1: Carry On

[edit | edit source]

Code:

1. pick up at: B position
2. drop at: C air bump
3. go to: A button

Solution:

Stand on B position and get carried to the Air Bump.

3.2.2: One Crate

[edit | edit source]

Code:

1. wait for: A crate pad
2. pick up at: C position
3. drop at: D air bump 

Solution:

Place the crate in A crate pad, using the upper bridge to cross. Wait for the Grabber Bot to cross the light bridge, then pick up the crate and stand on C position. Get carried to the Air Bump, and place the crate in B crate pad.

3.2.3: Negotiation

[edit | edit source]

Code:

1. pick up at: C position
2. drop at: A button
3. wait for: A button
4. pick up at: A button
5. drop at: B crate pad
6. pick up at: A button
7. drop at: C position 

Solution:

Pick up the crate and stand on C position. Once dropped at A button, step to the right and place the crate on the Button. After the Grabber Bot picks up the crate, stand on A button. Wait for the Grabber Bot to bring you back to C position.

3.2.4: Higher Ground

[edit | edit source]

Code (Grabber Bot):

1. wait for: D switch
2. pick up at: B position
3. go to: C air bump
4. wait for: E switch
5. drop at: A button

Code (Laser Bot):

1. turn: clockwise
2. turn: clockwise
3. wait for: D switch
4. turn: counter-clockwise
5. turn: counter-clockwise

Solution:

Pick up the crate from B position and stand on the position holding the crate. After the Grabber Bot brings you to A button, place the crate on the Button and head towards the goal.

3.2.5: Stow Away

[edit | edit source]

Code:

1. wait for: A button
2. pick up at: A button
3. drop at: B position
4. pick up at: C position
5. drop at: D hopper
6. jump to: step 4 

Solution:

Stand on A button and wait to be carried to B position. Run to the elevator.

3.2.6: Enclosed Button

[edit | edit source]

Code:

1. go to: B button
2. wait for: A button
3. pick up at: D position
4. drop at: B button
5. pick up at: A button
6. drop at: C crate pad
7. pick up at: B button
8. drop at: D position
9. go to: A button 

Solution:

Pick up the crate, place it on A button, go to D position, and wait for the Grabber Bot to end at A button.

3.2.7: Grab Loop

[edit | edit source]

Code:

1. wait for: A button
2. pick up at: A button
3. drop at: B button
4. go to: C button
5. jump to: step 1. 

Solution:

Stand on A button and get carried to B button. Take the crate down the ramp, place it on A button, and head towards the goal once the bridge is lit.

3.2.8: Pressing Predicament

[edit | edit source]

Code (Grabber Bot):

1. wait for: F switch
2. wait for: A button
3. pick up at: A button
4. drop at: D position

Code (Laser Bot):

1. wait for: F switch
2. wait for: A button
3. turn: counter-clockwise

Solution:

Bring both crates to the bridge, then flip the F switch. Place each crate on an elevator, and stand on A button. Get carried to D position, go up the ladder, and place the crates in the crate pads.

3.3: Electricity

[edit | edit source]

3.3.1: Circuit Breaker

[edit | edit source]

Code:

1. go to: A position
2. go to: B position

Solution:

Let the Walker Bot cross the bridge to A position. Once it crosses, flip the switch so it breaks down and blocks the laser, letting the elevator down. Once on the elevator pad, flip the switch again.

3.3.2: Entrapment

[edit | edit source]

Code (Walker Bot):

1. go to: B button
2. wait for: C button
3. go to: A button
4. go to: B button

Code: (Grabber Bot):

1. wait for: B button
2. pick up at: A button
3. drop at: C button

Solution:

Stand on A button, get carried to C button, and head towards the goal once the bridge flips, dumping the Grabber Bot.

3.3.3: Alternating Current

[edit | edit source]

Code:

1. pick up at: D position
2. drop at: B position
3. wait for: A crate pad
4. pick up at: B position 

Solution:

Cross the first bridge while the Grabber Bot is blocking the laser with the crate, and the second bridge after the Bot puts down the crate. Pick up the crate from C position, place it in A crate pad, and cross the bridges to the goal.

3.3.4: Good Sport

[edit | edit source]

Code (Walker Bot):

1. wait for: A crate pad
2. go to: D air bump

Code (Grabber Bot):

1. wait for: B crate pad
2. pick up at: B crate pad
3. drop at: B crate pad

Solution:

Pick up one crate and place it in A crate pad. Pick up the other crateand place it in B crate pad–the broken Walker Bot will block the Grabber Bot. Go back to A crate pad, pick up the crate, and wait on the Air Bump.

3.3.5: The Porter

[edit | edit source]

Code:

1. go to: A button
2. wait for: B button
3. go to: B button
4. wait for: A button
5. go to: A button 

Solution:

Pick up the crate, step on B button, head up the ramp, and place the crate on the middle column of the bridge where the wires meet. Go back down, step on A button as you pass, cross the lower bridge, and pick up the crate from the other side of the bridge. Put the crate in the crate pad from the elevator.

3.3.6: Trip Wire

[edit | edit source]

Code (Grabber Bot):

1. wait for: A button
2. pick up at: A button
3. drop at: B crate pad

Code (Laser Bot):

1. turn: clockwise
2. wait for: C aerogel
3. turn: counter-clockwise

Solution:

Place one crate on A button. Pick up the other crate and stand by the target, blocking the laser while the Grabber Bot passes. Wait for the Grabber Bot to drop the crate in the crate pad, then head towards the goal.

3.3.7: Electric Pass

[edit | edit source]

Code:

1. pick up at: A button
2. drop at: B air bump
3. wait for: D switch
4. go to: B air bump
5. wait for: D switch
6. go to: A button 

Solution:

Wait for the Grabber Bot to bring the crate to the Air Bump, then press D switch to launch the crate. Go down, grab the crate, and place it in the center of the bridge, blocking the laser. Flip D switch, head to the center of the upper bridge, then go to the goal once the Grabber Bot reaches A button

3.3.8: Electric Stasis

[edit | edit source]

Code:

1. wait for: A button
2. pick up at: A button
3. drop at: B crate pad


Solution:

Place a crate on A button. After the Grabber Bot picks it up, put the other crate on A button, causing the Bot to break down in front of the laser. Flip the switch, then run back to pick up the crate from A button. Place the crate in B crate pad and head to the goal.

3.3.9: Crash Override

[edit | edit source]

Code:

1. wait for: A button
2. go to: D position
3. wait for: A button
4. go to: E button 

Solution:

Pick up the crate from B crate pad and stand on A button allowing the Walker Bot to cross to D position. Place the crate back in B crate pad and stand on A button, so the Walker Bot breaks down on the left-side electric pad. Cross the bridge to the right side, and interrupt the laser, causing the Laser Bot to turn and lower the elevator. Then, while standing on the elevator, pick up the crate from the crate pad, and head towards the goal.


Next: Blue Luminous Sector